Displaying the Control Panel of the Device

You can display a control panel equivalent to the control panel of the device on a mobile terminal. This enables you to operate the device to configure printing and execute jobs, etc. without touching the control panel.
NOTE
Other users cannot operate the same device while this function is being used.
The screen of the mobile terminal is also displayed on the control panel of the device while this function is being used. Take care when using this function, as the screen being operated may be able to be seen by other users.

Prerequisites

The remote operation setting is enabled on the device to use.
Follow the procedure below to enable the setting from the control panel or Remote UI of the device.
From the control panel of the device
Display [Management Settings] > [License/Other] from (Settings/Registration) → set [Remote Operation Settings] to [On].
From the Remote UI
Display [Management Settings] > [License/Other] > [Remote Operation Settings] from [Settings/Registration] → enable [Use Remote Operation] → click [OK].
You can also connect to the Remote UI from the [Printer Details] screen of Canon PRINT Business.

Procedures

1.Tap [] on the top left corner of the Canon PRINT Business home screen.
[Select Printer] screen is displayed.
2.Select the device to display the control panel for.
3.Tap [Other Functions] in the home screen of Canon PRINT Business.
4.Tap [Remote Operation].
If the password entry screen is displayed, enter the password set in the device, and tap [Log In].
IMPORTANT
Do not leave the mobile terminal unattended with the password entry screen displayed. If the Wi-Fi network is disconnected while the password entry screen is displayed, this function may not be able to be used correctly the next time it is started.
If a message indicating that the device cannot be connected to is displayed while the remote operation setting of the device is enabled, start this function again after turning the power of the device off and then on. See the precautions in the manual of the device when turning the power off.

Result

A control panel equivalent to the control panel of the device is displayed on the mobile terminal.
Tap [Exit] to exit.
IMPORTANT
Other users cannot use the same device unless you tap [Exit].