NOTE |
To log in to a device by touching it with the mobile terminal, an environment that enables the device and mobile terminal to connect via a Wi-Fi network or direct connection is required. Depending on the device you are using, it may not be detected if you touch the mobile terminal when the device is in sleep mode*. Touch the mobile terminal after pressing the [Energy Saver] key to exit from sleep mode. * Sleep mode: The control panel of the device is turned off. Depending on the mobile terminal you are using, the printer panel login may take time contingent upon the Bluetooth communication performance. Depending on the mobile terminal you are using, you may be able to perform the printer panel login from a distance even if sensitivity is adjusted. Depending on the Bluetooth chip characteristics of the mobile terminal, you may not be able to perform the printer panel login. |
NOTE |
If the device you are using displays a message indicating that the device is not registered from [Nearby Printers], tap [OK] on the message screen to display the [Nearby Printers] screen. Refer to "Registering the Device (Searching with Bluetooth)" for how to register your device. |