When Images Like These are Output on Long Sheets
If outputs resembling examples shown in this section are produced repeatedly, see the relevant section in this manual as referred, and configure settings as appropriate. When making changes to the settings, be sure to read the important notes.
If the problems persist, contact your local authorized Canon dealer.
|
If an image like this is output
|
Check here
|
|
Irregular color registration appears
 <- Paper feeding direction
|
Paper conveyance speed is not appropriate.
Decrease the 4 items below equally. This may improve the situation.
|
|
A streak of uneven density appears
 <- Paper feeding direction
|
|
|
Image appears expanded along the paper feeding direction
 <- Paper feeding direction
|
|
|
Paper jam (0114JAM) occurs
|
Paper conveyance speed is not appropriate.
Increase the 4 items below equally. This may improve the situation.
|
|
Scrape-like marks are formed by uneven density
 <- Paper feeding direction
|
|
|
Wavy or scratchy marks are formed by uneven density
  <- Paper feeding direction
|
|
|
Streaks like dents appear on the tail edge side
 <- Paper feeding direction
|
Paper conveyance speed is not appropriate.
Decrease the 3 items below equally. This may improve the situation.
|
|
Thin lines like pressing marks appear on the tail edge side
 <- Paper feeding direction
|
Paper conveyance speed is not appropriate.
Increase the 3 items below equally. This may improve the situation.
|
|
Crease-like marks appear on the tail edge side
 <- Paper feeding direction
|
|
|
Streaks like pressing marks appear on the tail edge side
 <- Paper feeding direction
|
Paper conveyance speed is not appropriate.
Decrease the paper conveyance speed in the invert/output area. This may improve the situation.
|
|
Uneven brightness appears on both lead and tail edge sides
 <- Paper feeding direction
|
Paper conveyance speed is not appropriate.
Increase the paper conveyance speed in the invert/output area. This may improve the situation.
|
|
Image appears brighter on the tail edge side
 <- Paper feeding direction
|
|
|
Streaks of uneven brightness appear on the tail edge side
 <- Paper feeding direction
|