Configuring the Paper Source on a Page Basis

You can configure the paper source used when printing the document text on a document.

You can configure the paper source settings for specified pages differently from the entire document or the chapter.

NOTE
The paper source setting is prioritized in the order page > chapter > document. This function can only be used when you select a Canon printer and the [Use print settings of Editor] check box on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button. The document text are the pages other than the following specified in [Sheet for Insertion]. Front cover Back cover Tab paper Sheets For more information on how to configure the Front cover, Back cover, Tab paper, and Sheets, see the following. Configuring the Front Cover/Back Cover/Tab Paper/Sheets For more information on how to configure the paper source for the entire document, see the following. Configuring the Paper Source For more information on how to set the paper source on a chapter basis, see the following. Configuring the Paper Source on a Chapter Basis For information on canceling settings on a page basis, see the following. Canceling Print Settings Specified on a Page Basis

NOTE

The paper source setting is prioritized in the order page > chapter > document.

This function can only be used when you select a Canon printer and the [Use print settings of Editor] check box on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button.

The document text are the pages other than the following specified in [Sheet for Insertion].

Front cover

Back cover

Tab paper

Sheets

For more information on how to configure the Front cover, Back cover, Tab paper, and Sheets, see the following.

Configuring the Front Cover/Back Cover/Tab Paper/Sheets

For more information on how to configure the paper source for the entire document, see the following.

Configuring the Paper Source

For more information on how to set the paper source on a chapter basis, see the following.

Configuring the Paper Source on a Chapter Basis

For information on canceling settings on a page basis, see the following.

Canceling Print Settings Specified on a Page Basis

Select the page to set the paper source settings for on the [Page Tree] tab on the Navigation Window.

NOTE
If the [Page Tree] tab on the Navigation Window is not displayed, see the following. Displaying/Hiding the Navigation Window

Click the icon for the ribbon command.

Or, follow one of the steps described below.

Select [Page Settings] on the ribbon > [Original Page Settings]

Click [Original Page Settings] on the ribbon

Right-click and select [Original Page Settings]

[Original Page Settings] is displayed.

NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them. Adding Commands to Ribbons This operation can also be performed with the tool buttons. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Tool Buttons on the Toolbar Lists of Ribbon Commands/Tool Buttons

Select the [Specify paper source for selected pages] check box in [Paper Source Settings] on the [Print Settings] tab.

Select the paper source to set from the [Paper Source of Content Pages] pull-down list.

NOTE
Click [Apply] to check the document preview in the Work Window without closing [Original Page Settings].

Click [OK].

The page icon displayed on the [Page Tree] tab on the Navigation Window changes and the page number changes to blue.

NOTE
You can also right-click the page to change the settings for on the [Page Tree] tab on the Navigation Window, and select the paper source to set from [Paper Source for Original Pages].