Selecting the Setting Method

There are two methods for setting device information. When device information fails to be automatically retrieved, follow one of the procedures below to set the device information.

Directly Entering the IP Address or Host Name of the Device

Searching for the Device on the Network

In [Select the Setting Method] in [IP Address Settings], select one of these methods for setting device information.

NOTE

You can follow the procedure below to display the [IP Address Settings] dialog box.

1.	Start Monitor Setup. Starting and Exiting Desktop Monitor Setup [Printer List - Canon imageRUNNER ADVANCE Desktop - Monitor Setup] is displayed.
2.	Select the devices to set device information for in [Printer Name] in [Printer List - Canon imageRUNNER ADVANCE Desktop - Monitor Setup].
3.	Select the [File] menu > [IP Address Settings].

[Enter the IP address or host name of the device directly]	Select this to set the device information by directly entering the IP address or host name of the device.
[Discover devices on network]	Select this to set the device information by searching the network for the device.
[Next]	Selecting [Enter the IP address or host name of the device directly] displays [Set Device Information] in [IP Address Settings]. Setting Device Information Selecting [Discover devices on network] displays [Discover Devices] in [IP Address Settings]. Discover Devices

The procedure for setting the device information when [Enter the IP address or host name of the device directly] is selected is as follows.

1.	Setting Device Information
2.	Selecting the Device Type

The procedure for setting the device information when [Discover devices on network] is selected is as follows.

1.	Discover Devices
2.	Selecting a Device
3.	Setting Device Information
4.	Selecting the Device Type