After the default paper setting is registered, the paper setting screen is not displayed when paper is loaded, and the same setting is always used. If you load a different paper size or type without changing the paper settings, the machine may not print properly. To avoid this problem, select <Specify When Loading Paper> in step 3, and then load the paper.
|
|
Touch panel model
|
|
Black and white LCD model
|
1
|
Select <Custom>.
|
2
|
Specify the length of the <X> side and <Y> side.
Touch panel model
Select <X> or <Y>, and enter the length of each side using the numeric keys.
If you register the paper size you use frequently on buttons <S1> to <S3>, you can call them up with one touch. Registering a Custom Paper Size
Black and white LCD model
Execute the following steps in sequence: <X> enter the paper width <Y> enter the paper length
|
3
|
Select <Apply>.
|