Placing Originals

Place originals on the platen glass. For information on loadable sizes, etc., see Main Unit.
Use originals that are completely dry
When placing originals, make sure that any glue, ink, or correction fluid on the originals has completely dried.
1
Open the platen glass cover.
2
Place the original face down on the platen glass.
Align the corner of the original with the top-left corner of the platen glass.
To scan transparent originals (for example, tracing paper or transparencies), cover them with plain white paper.
3
Gently close the platen glass cover.
The machine is ready to scan the original.
When scanning is complete
Remove the original from the platen glass.
3853-020