Setting Sounds
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You can set the volume of each of these sounds individually.
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences> 
<Volume Settings>.
<Volume Settings>.3
Select a setting.
Setting | Description | Action |
<Fax Tone> | Sound produced during a fax transmission | Go to step 4. |
<Ring Tone> | Sound produced when an incoming fax is received | |
<TX Done Tone> | Sound produced when fax sending is complete | |
<RX Done Tone> | Sound produced when fax receiving is complete | |
<Scanning Done Tone> | Sound produced when fax original scanning is complete | |
<Entry Tone> | Confirmation sound each time a key on the operation panel or button on the display is pressed | Select <On> (produce a tone) or <Off> (not produce a tone). |
<Invalid Entry Tone> | Sound produced when an invalid key operation is performed, such as when you enter a number outside the valid setting range | |
<Warning Tone> | Sound produced when a paper jam or other error occurs | |
<Job Done Tone> | Sound produced when an operation such as copying or scanning is complete | |
<Energy Saver Alert> | Sound produced when the machine enters or exits sleep mode | |
<Original in Feeder Detection Tone> | Sound produced when an original is loaded in the feeder |
4
Adjust the volume, and select <Apply>.
To mute the sound, move the cursor all the way to the left.
End sound only for error
Select <When Error>, select <On>, and select <Apply>.