Procedure for Setting to Send E-Mail
Before configuring the machine for scanning to e-mail, check the setup flow shown below.
 |
|
 |
|
Make sure that the machine and the computer are correctly connected.
|
 |
||||
 |
 |
Make sure that you have the following information:
The IP address of the machine. Viewing Network Settings
An e-mail address to be registered as a destination.
Information about the e-mail server, including the SMTP server name, port numbers, whether authentication is required, and the user name and password for authentication.
 For more information about the e-mail server settings, contact your Internet service provider or Network Administrator.
|
||
|
|
||||
 |
 |
Make sure that the computer meets the system requirements for the Send Function Setting Tool (sending e-mail).
System requirements for the Send Function Setting Tool System Environment
Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication Disabling Remote UI |
||
|
|
||||
 |
 |
Set the machine configuration.
Configuring Basic E-Mail Settings Configuring Basic E-Mail Settings
Configuring Detailed E-Mail Communication Settings (Authentication, Encryption, etc.) Configuring E-Mail Communication Settings
|