Custom Settings
|
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Copies> | 1 to 9999 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<2-Sided Printing> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Paper Feed> | |||||||
<Default Paper Size> | <Letter>, <Legal>, <A4>, <A3>, <A5>, <B4>, <B5>, <11x17>, <Executive>, <Statement>, <305x457 mm>, <320x450 mm(SRA3)>, <330x483mm> | Yes | Yes | Yes | No | B | Settings for Printer Settings |
<Default Paper Type> | <Thin 1>, <Thin 2>, <Plain 1>, <Plain 2>, <Plain 3>, <Heavy 1>, <Heavy 2>, <Heavy 3>, <Heavy 4>, <Heavy 5>, <Heavy 6>, <Color>, <Recycled>, <Tracing>, <Transparency>, <Labels>, <Bond>, <Pre-Punched>, <Letterhead>, <Tab>, <Clear Film> | Yes | Yes | Yes | No | B | Settings for Printer Settings |
<Paper Size Override> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Paper Output> | |||||||
<Finishing> | <Finishing>: <Off>, <Collate>, <Group>, <Rotate+Collate> *1, <Rotate+Group> *1, <Offset+Collate> *1 *2, <Copies>, <Offset+Group> *1, <Staple+Collate> *1*3, <Staple+Group> *1*3, <Eco(Stpl-Fr)+Col> *1*4, <Eco(Stpl-Fr)+Grp> *1*4 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Punch> | <Punch>: <On>, <Off> <Punch Position>: <Left>, <Right>, <Top>, <Bottom> <Punch Type>: <Finisher(2 Hole)>, <Finisher(3 Hole)>, <Finisher(4 Hole)>, <Puncher Unit> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Fold> | <Fold>: <On>, <Off> <Fold Type>: <C-Fold>, <Z-Fold>, <Half Fold>, <Double Parallel>, <Accordion Z-Fold>, <Saddle Fold> <Saddle Fold Sheet Together>: When the Booklet Finisher is attached *5: 1 to 5, 1 | Yes | Yes | Yes | No | C | Settings for Printer Settings |
<Face Up/Down> | <Face Down>, <Face Up> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Print Quality> | |||||||
<Image Refinement> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Density>*1 | -8 to +8; 0 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Density (Fine Adjust)>*1 | <High>: -8 to +8; 0 <Medium>: -8 to +8; 0 <Low>: -8 to +8; 0 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Toner Save> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Line Refinement> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Horizontal Line Refinement> | <Off>, <Level 1>, <Level 2>, <Level 3>, <Level 4> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Vertical Line Refinement> | <Off>, <Level 1>, <Level 2>, <Level 3>, <Level 4> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Resolution> | <1200 dpi>, <600 dpi> | Yes | Yes | Yes | Yes | B | Settings for Printer Settings |
<Layout> | |||||||
<Binding Location> | <Long Edge>, <Short Edge> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Gutter> | -50.0 mm to +50.0 mm; 0.0 mm | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Offset Short Edge (Front)> | -50.0 mm to +50.0 mm; 0.0 mm | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Offset Long Edge (Front)> | -50.0 mm to +50.0 mm; 0.0 mm | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Offset Short Edge (Back)> | -50.0 mm to +50.0 mm; 0.0 mm | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Offset Long Edge (Back)> | -50.0 mm to +50.0 mm; 0.0 mm | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Auto Error Skip> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Timeout> | <Timeout>: <On>, <Off> <Timeout>: 5 seconds to 300 seconds; 15 seconds | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Print After Completing RIP> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Booklet> | <Booklet>: <On>, <Off> <Book Opening>*1: <Left Opening>, <Right Opening> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Saddle Stitch>*1 | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Saddle Press>*1 | <On>, <Off> <Saddle Press Strength>: -10 to 10; 0 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Creep Correction>*1 | <Off>, <Auto>, <Correction Width> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Use Cover Inserter>*1 | <Off>, <Inserter 1>, <Inserter 2> | Yes | Yes | Yes | No | C | Settings for Printer Settings |
<Transparency Interleaving>*1 | <Off>, <Blank>, <Printed> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Copy Set Numbering>*1 | |||||||
<Copy Set Numbering> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Print Position>*1 | <5 Locations>, <Top Left>, <Bottom Left>, <Top Right>, <Bottom Right>, <Full Surface> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Starting Number>*1 | 1 to 9999; 1 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Number Size>*1 | <Small(12 point)>, <Medium(24 point)>, <Large(36 point)> | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Density>*1 | 1 to 5; 3 | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Number Position Vertical>*1 <Number Position Horizontal>*1 | -8 mm to +8 mm; 0 mm | Yes | Yes | Yes | Yes | C | Settings for Printer Settings |
<Personality>*1 | <Auto>, <PS>, <PCL>, <Imaging>, <PDF>, <XPS> | Yes | Yes | Yes | No | C | Settings for Printer Settings |
<Mode Priority>*1 | <None>, <PS>, <PCL>, <PDF>, <XPS> | Yes | Yes | Yes | No | C | Settings for Printer Settings |
<Auto Select>*1 | <PS>: <On>, <Off> <PCL>: <On>, <Off> <XPS>: <On>, <Off> <Imaging>: <On>, <Off> <PDF>: <On>, <Off> | Yes | Yes | Yes | No | C | Settings for Printer Settings |
<Initialize> | <Yes>, <No> | Yes | Yes | No | No | No | - |
*1 | Indicates items that appear only when the appropriate optional product is available for use or the appropriate setting is specified. |
*2 | Copies: 1 to 9999 |
*3 | Staple Position (Staple+Collate, Staple+Group): Corner (Upper-L), Double (Top), Corner (Upper-R), Double (Right), Corner (Lower-R), Double (Bottom), Corner (Lower-L), Double (Left). |
*4 | Staple Position (Eco(Stpl-Fr)+Col, Eco(Stpl-Fr)+Grp): Corner (Upper-L), Corner (Upper-R), Corner (Lower-R), Corner (Lower-L). |
*5 | The number of sheets may vary according to your finisher and the paper thickness. |