Attaching Numbers and Symbols to Copies

You can attach page numbers, management numbers, or dates, etc. when copying. You can also attach stamps which read "Confidential," etc. This allows for easier management in situations such as when you distribute multiple copies of documents.

Place the original. Placing Documents

Press <Copy>. <Main Menu> Screen

Press <Options> on the Copy Basic Features screen. Copy Basic Features Screen

Press <Page Numbering>, <Copy Set Numbering>, <Watermark>, or <Print Date>.

Select the printing format.

There are no settings to select if you specified <Copy Set Numbering>, <Watermark>, or <Print Date> in step 4. Proceed to step 6.

Select the printing position.

Finely adjust the page number position

In <Set Details>, you can adjust the printing position and change the print position when performing two-sided printing.

Enter a positive (+) value for X to move the printing position to the left, or a minus (-) value for Y to move the printing position upward.

Press <Set Details>, specify each setting, and press <OK>.

Select the orientation of the placed original.

As shown in the illustrations below, if the original is placed in the portrait orientation when facing you, select <Upright Image>, if placed in the landscape orientation, select <Sideways Image>.


	<Upright Image>		<Sideways Image>

Specify the content to print.

Press <OK>

<Close>.

Press

(Start).

Copying starts.


Numbers and symbols are not printed on covers (Adding a Cover and Back Cover) or insert sheets (Inserting Sheets and Chapter Pages (Insert Sheets)). Copy set numbers are printed on all copied pages. Copy set numbers can be printed together with dates or text. <Print Settings> <Copy Set Numbering Option Settings> The text for <Page Numbering> and <Watermark> can also be selected from the text which has been registered in <Register Characters for Page Numbering/Watermark>. If you set any two of <Page Numbering>, <Watermark>, <Print Date>, or <Copy Set Numbering> to print in the same position, a message asking whether to print with these settings appears when you press (Start). If you select <With Chapter Numbers> in combination with <Insert Sheets>, the chapter numbers are counted at the following times: After each chapter page is inserted After each sheet insertion is inserted If you set <Copy Set Numbering Option Settings> to <On>, the settings you can specify change as follows. <Copy Set Numbering Option Settings> You can no longer select <Full Surface> and <Numbers in 5 Locations> for print positions in the Copy Set Numbering mode. The number sizes of the Copy Set Numbering mode become <10.5 pt>, <12.0 pt>, and <14.0 pt>.

Numbers and symbols are not printed on covers (Adding a Cover and Back Cover) or insert sheets (Inserting Sheets and Chapter Pages (Insert Sheets)).

Copy set numbers are printed on all copied pages.

Copy set numbers can be printed together with dates or text. <Print Settings>

The text for <Page Numbering> and <Watermark> can also be selected from the text which has been registered in <Register Characters for Page Numbering/Watermark>.

If you set any two of <Page Numbering>, <Watermark>, <Print Date>, or <Copy Set Numbering> to print in the same position, a message asking whether to print with these settings appears when you press

(Start).

If you select <With Chapter Numbers> in combination with <Insert Sheets>, the chapter numbers are counted at the following times:

After each chapter page is inserted

After each sheet insertion is inserted

If you set <Copy Set Numbering Option Settings> to <On>, the settings you can specify change as follows. <Copy Set Numbering Option Settings>

You can no longer select <Full Surface> and <Numbers in 5 Locations> for print positions in the Copy Set Numbering mode.

The number sizes of the Copy Set Numbering mode become <10.5 pt>, <12.0 pt>, and <14.0 pt>.