Staple Finisher-AA

Paper Sizes
Paper available for the Main Unit (Supported Paper Sizes)
Paper Weight
52 g/m² to 300 g/m²
Paper Type
Paper available for the Main Unit (Supported Paper Types)*1
Capacity Per Tray*2
Upper Tray (Tray A)
No Collating/Collate/Group mode:
A4, B5, A5, A5R, LTR, STMT, STMTR, EXEC, and 16K: 250 sheets (or 47 mm in height or less)
A3, B4, A4R, B5R, 320 mm x 450 mm(SRA3), 11" x 17", 305 mm x 457 mm, LGL, LTRR, 8K, and 16KR: 125 sheets (or 24 mm in height or less)
No Collating/Collate/Group mode with different paper sizes:
Combination of A4, B5, and LTR: 47 mm in height
All other combinations: height 24 mm
Collate + Offset, Group + Offset mode:
A4, B5, LTR, EXEC, and 16K: 250 sheets (or 47 mm in height or less)
A3, B4, 11" x 17", and 8K: 125 sheets (or 24 mm in height or less)
Lower Tray (Tray B)
No Collating/Collate/Group mode:
A4, B5, A5, A5R, LTR, STMT, STMTR, EXEC and 16K: 3,000 sheets or height 423 mm*3
A3, B4, A4R, B5R, 320 mm x 450 mm (SRA3), 305 mm x 457 mm, 11" x 17", LGL, LTRR, 8K, and 16KR: 1,500 sheets or height 216 mm
No Collating/Collate/Group mode with different paper sizes:
Combination of A4, and B5, LTR: 3,000 sheets (or 423 mm in height)
All other combinations: 1,500 sheets (or 216 mm in height)
Collate + Offset and Group + Offset mode:
A4, B5, LTR, EXEC, and 16K: 3,000 sheets or height 423 mm*3
A3, B4, A4R, 11" x 17", LGL, LTRR, and 8K: 1,500 sheets or height 216 mm
Staple (Corner/Double):
A4, B5, LTR, EXEC, and 16K: 200 sets/total 3,000 sheets (or 423 mm in height)
A3, B4, A4R, 11" x 17", LGL, LTRR and 8K: 100 sets/total 1,500 sheets (or 216 mm in height)
Staple-Free (Eco):
A4, LTR, and 16K: 200 sets
A3, 11" x 17", and 8K: 100 sets
Staple
Max. Stapling Capacity*4
Staple (Corner/Double):
A4, B5, LTR, EXEC, and 16K:
50 sheets (52 g/m2 to 90 g/m2)
30 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
A3, B4, A4R, 11" x 17", LGL, LTRR, and 8K:
30 sheets (52 g/m2 to 90 g/m2)
20 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
Staple (Eco):
A3, A4, 11" x 17", LTR, 8K, and 16K:
5 sheets (52 g/m2 to 64 g/m2)
4 sheets (65 g/m2 to 81.4 g/m2)
3 sheets (81.5 g/m2 to 105 g/m2)
Manual Staple:
All sizes: 50 sheets (90 g/m2) or less
Punch
(When the puncher unit is attached)
Paper Sizes
Two/Four Holes:
Two Holes: A3, B4, A4, A4R, B5, B5R, 11" x 17", LGL, LTR, LTRR, EXEC, 8K, 16K, and 16KR
Four Holes: A3, A4, 11" x 17", LTR, EXEC, 8K, and 16K
Two/Three Holes:
Two Holes: A3, B4, A4, A4R, B5, B5R, 11" x 17", LGL, LTR, LTRR, EXEC, 8K, 16K, and 16KR
Three Holes: A3, B4, A4, B5, 11" x 17", LTR, EXEC, 8K, and 16K
Paper Weight
52 g/m2 to 300 g/m2
Punch Hole
Two/Four Holes, or Two/Three Holes
Dimensions (W x D x H)
537 mm x 623 mm x 969 mm
Weight
Approximately 30 kg
Installation Space Including the Main Unit
(W x D)
1,620 mm x 1,123 mm (when the Single Pass DADF-A is attached and the auxiliary tray is extended)
*1 Excluding Thin 2 (two-sided printed)
*2 For 81.4 g/m² paper only. Capacity varies in other cases.
*3 Thin (52 g/m² to 59 g/m²): 1,500 sheets (or 216 mm in height)
*4 When the standard staple cartridge is attached. (The maximum stapling capacity may vary, depending on the paper type and weight.)
6E4H-0W3