Fax TX Result Report (imageRUNNER 2206iF)
You can check the communication result of sending faxes by printing a Fax TX Result Report. The report can be printed either every time a transmission is completed or only when a sending error occurs.
<Menu> 
<Output Rprt.> <Report Settings> <Fax TX Result Report> Select the print setting
<Output Rprt.> <Report Settings> <Fax TX Result Report> Select the print setting
<Off>
Select if you do not want to print Fax TX Result Reports.
<On>
Select to print a Fax TX Result Report every time you send a document.
<Only When Error Occurs>
Select to print a Fax TX Result Report only when a sending error occurs.
Example:
Result
"OK" indicates that the transmission was completed successfully while "NG" and three digits (an error code) indicates that the transmission failed (Countermeasures for Each Error Code).
|
|
To print a part of a fax document on the reportWhen you select <On> or <Only When Error Occurs>, a part of a fax document can be included in the report. Tap <Include TX Image> to <On>. However, Send jobs originating from the fax driver are omitted from this report.
  |