<Printer>
This section describes the printer settings.
<Output Report>
(Settings/Registration)
<Function Settings>
<Printer>
You can print reports for the machine settings.
<Printer Settings>
(Settings/Registration)
<Function Settings>
<Printer>
Specify the printer settings.
For more information, see Setting the Machine (PS/PCL/UFR II Printer).
<Restrict Printer Jobs>
(Settings/Registration)
<Function Settings>
<Printer>
If this setting is set to <On>, you can restrict jobs from the printer driver.
<PDL Selection (Plug and Play)>
(Settings/Registration)
<Function Settings>
<Printer>
Select default Page Description Language (PDL).
<Prioritize Printer Driver Settings for Jobs with MP Tray>
(Settings/Registration)
<Function Settings>
<Printer>
You can prioritize printer driver settings over the paper settings in the machine when printing a job with the multi-purpose tray specified as the paper source.
|
When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the multi-purpose tray: If paper is loaded in the multi-purpose tray If this setting is set to <On> If the paper size specified in the printer driver greatly differs from the paper size set in the multi-purpose tray, an error message is displayed. |
<PS Password Settings>
(Settings/Registration)
<Function Settings>
<Printer>
You can specify the password that restricts the use of the control command prepared by the PS printer.
|
<SystemParamsPassword> is a password that allows changes to the system parameter, and <StartJobPassword> is a password that allows startjob, exitserver operator to perform. For more information, check PostScript language specifications. |
<Paper Feed Mode When Using PCL Emulation>
(Settings/Registration)
<Function Settings>
<Printer>
You can set the paper source used for the PCL5 PaperSource command.
|
For details on each setting, see Setting the Machine (PS/PCL/UFR II Printer). |