You can print various types of reports from the machine, to check settings and logs. Some reports are printed automatically, and some are printed manually. You can also set to print some reports automatically only when an error occurs.
You can print the following types of reports from the machine.
This report is used to check whether documents were sent successfully to the intended destinations when a sequential broadcast transmission was performed.
This report enables you to print and check the contents of the Address List (Address Lists 1 to 10 or one-touch buttons) in [Management Settings] (Settings/Registration).
This report is used to check whether all the data and settings have been successfully initialized.
NOTE
The following conditions must be met for a report to be printed: There is a paper drawer with [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) set to 'On'.
One of the following paper sizes is loaded in that paper drawer:
11" x 17"
LGL
LTR
LTRR
STMTR
The loaded paper is one of the following types:
Plain
Recycled
Color
Coated
Custom Paper Type (paper with the following settings; Basis Weight: 17 lb bond to 28 lb bond (64 g/m2 to 105 g/m2), Type: Normal, Finish: Uncoated or Recycled)
However, if [Consider Paper Type] for Copy is set to 'On' in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration), paper is not fed from paper drawers with color paper specified.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.