Staple Finisher-AC/Booklet Finisher-AC

This section describes how to clear a staple jam which occurs in the stapler unit of the Staple Finisher-AC/Booklet Finisher-AC. The location of the Staple Finisher-AC/Booklet Finisher-AC is indicated in the following illustration.
IMPORTANT
Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
NOTE
The Staple Finisher-AC and Booklet Finisher-AC are optional products.*
* imagePRESS C810, imagePRESS C710

1.
Open the front cover of the finisher.
*1 Booklet Finisher-AC
*2 Staple Finisher-AC
2.
Hold the green tab on the staple cartridge and pull it straight out.
3.
Remove any staples jammed in the staple case.
1. Push down the tab on the staple case.

2. Remove all jammed staples and exposed staples.
3. Return the tab on the staple case to its original position.
CAUTION
Be careful with the staple waste as this may result in personal injury.
4.
Hold the green tab on the staple cartridge and push it in as far as it will go.
5.
Close the front cover of the finisher.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
NOTE
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples.
3U17-0UR