Speed/Precision Priority for Double Staple
You can set whether to give priority to the double stapling speed or to precision.
This mode can be set when the Staple Finisher-W PRO or Booklet Finisher-W PRO is attached. (See "Staple Finisher-W PRO/Booklet Finisher-W PRO/Puncher Unit-BS/Puncher Unit-BT/Puncher Unit-BU.")
1.
Press 
.
.2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Speed/Precision Priority for Double Staple].
3.
Select [Speed Priority] or [Precision Priority] → press [OK].
[Speed Priority]: | Priority is given to the double stapling speed. The precision for the double stapling is decreased. |
[Precision Priority]: | Priority is given to the double stapling precision. The production speed is decreased. |
IMPORTANT |
The [Speed/Precision Priority for Double Staple] function is enabled only when using the following paper: Paper size: The width for the feeding direction is from 182 mm to 215.9 mm Paper type: Thin 1, Plain 1 to 2, Heavy 1, Color 1 to 2, Recycled 1 to 3, Pre-Punched 1 to 2 Paper weight: 64 g/m2 to 128 g/m2 If you select [Speed Priority], stapled output paper may not be aligned due to the temperature, humidity, or characteristics of the paper type. |