Confirming Prints during Copying
This mode enables you to output the entire print set or a single page to another output tray while printing a copy job. This mode is useful when you want to check the output several times while making a large amount of copies.
IMPORTANT |
[Proof Print] appears while you are making multiple copies in the Collate, Offset, or Staple mode. [Proof Print] can be used when the Staple Finisher-W PRO, the Booklet Finisher-W PRO, the Staple Finisher-AC, the Booklet Finisher-AC, or the High Capacity Stacker-H is attached. |
1.
Press [Proof Print] on the pop-up screen that appears while the machine is copying.
The Proof Print mode can also be used on the Status Monitor/Cancel screen. (See "Proof Printing.")
2.
Select [All Pages] or [1 Page (Random)] → press [Start Printing].
[All Pages]: | Prints the entire print set. |
[1 Page (Random)]: | Prints a page which follows by the currently printing page. One sheet of paper, which includes one page when performing 1-sided copying, and two pages when performing 2-sided copying, is output. |
3.
Check the output sample.
Check the sample that is output to another output tray.
NOTE |
When proof printing is complete, the machine automatically resumes the job. If you need to adjust the settings, press [Cancel] or  and then make a necessary adjustment. |
NOTE |
You cannot select [Proof Print] for the following jobs. A job to which the Group or Offset Group mode is set A job which is waiting to be copied or paused A job which is currently interrupt copying A job which is currently sample copying A job which is currently proof printing If the remaining copy is the last or nearly last, you cannot make proof print by selecting [All Pages]. If the pages in one copy are few, you may not be able to make proof print by selecting [1 Page (Random)]. It may take time to output even if you select [Proof Print]. |