Trace & Smooth Settings
You can change the recognition rate of line drawings of the original when creating a file with outline graphics.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
1.
Press 
.
.2.
Press [Function Settings] → [Common] → [Generate File].
3.
Press [Trace & Smooth Settings].
4.
Select [On] for <Outline Graphics> → specify the settings for <Graphics Recognition Level>.
Details of each item are shown below. | |
<Graphics Recognition Level>: | |
[Normal]: | Sets a standard recognition level. (The data size becomes small.) |
[Moderate]: | The recognition level and data size are in between those of [Normal] and [High]. |
[High]: | Sets the highest recognition level. (The data size becomes large.) |
NOTE |
If you increase <Graphics Recognition Level>, the data size also increases. It is recommended that you first use [Normal], and if desirable results are not obtained, try increasing the recognition level to [Moderate] or [High]. |
You can specify the setting for the image quality level of the background in <Background Image Level>.
Details of each item are shown below. | |
<Background Image Level>: | |
[Data Size Priority]: | The data size is small, but the background image quality is low. |
[Normal]: | The data size and background image quality are in between those of [Data Size Priority] and [Quality Priority]. |
[Quality Priority]: | The data size is large, but the background image quality is high. |
Select [Off] if you do not want to perform Outline Graphics.
5.
Press [OK].
NOTE |
This setting is disabled when sending a fax or I-fax. |