on the control panel. The Energy Saver mode conserves energy by lowering the temperature of the fixing unit. To reactivate the machine, press again.Changing the Energy Saver Mode
When the machine is not used for a prolonged period of time, you can set the machine to enter the Energy Saver mode by pressing on the control panel. The Energy Saver mode conserves energy by lowering the temperature of the fixing unit. To reactivate the machine, press again.
on the control panel. The Energy Saver mode conserves energy by lowering the temperature of the fixing unit. To reactivate the machine, press again.Energy Saving Level | Recovery Time |
-10% | Approximately 30 seconds |
-25% | Approximately 40 seconds |
-50% | Approximately 90 seconds |
Zero Restore Time | Approximately 0 seconds |
IMPORTANT |
Setting [Mode After Energy Saver Key Pressed] in [Energy Saver Mode] is required to set energy saver mode (See "Switching Modes Activated After Pressing Energy Saver Key.") |
NOTE |
After deactivating the Energy Saver mode, the machine's recovery time may vary, depending on the energy saving level setting and the surrounding environment (i.e., temperature, humidity, etc.). |
1.
Press 
.
.2.
Press [Preferences] → [Timer/Energy Settings] → [Change Energy Saver Mode].
3.
Select the desired energy saving level → press [OK].
Selecting [Zero Restore Time] (0%) enables you to copy or print in approximately 10 seconds.