Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.
When Department ID Management is enabled, setting here is not required. Setting the Department ID Management
1
Select <Menu> in the Home screen. Home Screen
2
Select <Management Settings>.
If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <License/Other>/<Remote UI Settings/Update Firmware> <Remote UI Settings> <Restrict Access>.
4
Select <On>.
5
Specify the Remote UI Access PIN.
Enter a PIN, and select <Apply>.
The Confirm screen is displayed. Enter the PIN once again to confirm.
You cannot register a PIN that consists only of zeros, such as "00" or "0000000."
Do not forget your PIN. If you forget your PIN, use the procedure above to set a new PIN.
If <Management Settings> are initialized
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. <Initialize Menu>
3S22-072