Installing a Driver Using Master Setup
Master Setup can install the driver for a device without worrying about the connection environment of the target device (whether the device uses a network connection or USB connection).
Install the driver by following the instructions on the screen.
NOTEMaster Setup does not support the following functions. Use an installer other than Master Setup if these functions are required.
Discovery of devices connected via IPv6
Identification of multiple devices of the same model connected via USB
Shared printer settings
Installation of alternate drivers
Prerequisites
The environment is connected to the Internet
Installation using Master Setup is only supported with Windows 10/11.
Page description language selection (Plug & Play) function setting of the device (if required with the device you are using)
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the setting method, refer to the manual of the device.
The device is one that is on the same subnet as the computer you are using (when discovering a device connected via a network)
When starting the computer, log on as a user with administrator privileges.
Procedures
1.
Start the installer.
Extract the downloaded file, and double-click [Msetup4.exe].
If the combination of selected language and region is not supported by the driver, the driver is installed in the language set for Windows.
2.
Proceed with the installation according to the instructions on the screen.
3.
Click [Finish], [Restart Now], or [Later].
A shortcut to the online manual is created on your desktop.
If device information cannot be acquired during installation, set the device information before printing. You can also change or import a configuration profile while setting the device information.
For details about how to set the device information, refer to the driver help.