Inner Finisher-J

Paper Sizes
120 V machine:
Paper available for the Main Unit (Supported Paper Sizes for the 120 V Machine)
230 V machine:
Paper available for the Main Unit (Supported Paper Sizes for the 230 V Machine)
Paper Weight
14 lb bond to 80 lb cover (52 g/m2 to 220 g/m2)
Paper Type
Paper available for the Main Unit (Supported Paper Types)
Capacity Per Tray*1
Upper Tray (Tray B)
No Collating/Collate/Group mode:
45 sheets (height 1/4" (5.2 mm))
No Collating/Collate/Group mode with different paper sizes:
45 sheets (height 1/4" (5.2 mm))
Lower Tray (Tray A)
No Collating/Collate/Group mode:
LTR, STMTR, EXEC, A4, B5, A5R, A5, and 16K: Approximately 500 sheets (height 2 1/8" (52 mm))
11" x 17", LGL, LTRR, A3, B4, A4R, B5R, 8K, and 16KR: 250 sheets or height 1" (26 mm)
A6R: 30 sheets
No Collating/Collate/Group mode with different paper sizes:
LTR, STMTR, EXEC, A4, B5, A5R, A5, and 16K:Approximately 500 sheets (height 2 1/8" (52 mm))
11" x 17", LGL, LTRR, A3, B4, A4R, B5R, 8K, and 16KR: 250 sheets or height 1" (26 mm)
A6R: 30 sheets
Collate + Offset and Group + Offset mode:
LTR, EXEC, A4, B5, and 16K: Approximately 500 sheets (height 2 1/8" (52 mm))
11" x 17", LGL, LTRR, A3, B4, A4R, B5R, 8K and 16KR: 250 sheets or height 1" (26 mm)
Staple (Corner/Double) mode:
LTR, EXEC, A4, B5, and 16K: 30 sets or height 2 1/8" (52 mm)
11" x 17", LGL, LTRR, A3, B4, A4R, and 8K: 30 sets or height 1" (26 mm)
Staple (Staple-Free) mode:
LTR, A4, B5, and 16K: 30 sets or height 2 1/8" (52 mm)
11" x 17", A3, B4, and 8K: 30 sets or height 1" (26 mm)
Staple
Max. Stapling Capacity*2
Staple (Corner/Double):
LTR, EXEC, A4, B5, and 16K: 50 sheets (14 lb bond to 24 lb bond (52 g/m2 to 90 g/m2))
11" x 17", LGL, LTRR, A3, B4, A4R, and 8K: 30 sheets (14 lb bond to 24 lb bond (52 g/m2 to 90 g/m2))
Staple (Staple-Free):
11" x 17", LTR, A3, B4, A4, B5, 8K and 16K:
5 sheets (13.8 lb bond to 17 lb bond (52 g/m2 to 64 g/m2))
4 sheets (17.3 lb bond to 21.7 lb bond (65 g/m2 to 81.4 g/m2))
3 sheets (21.7 lb bond to 27.9 lb bond (81.5 g/m2 to 105 g/m2))
Manual Staple:
All sizes:
50 sheets (14 lb bond (52 g/m2))
45 sheets (17 lb bond (64 g/m2))
40 sheets (20 lb bond (80 g/m2))
Punching
(When the inner puncher unit is attached)
Paper Sizes
When the Inner 2/F4 Hole Puncher-C is attached (for the 230 V machine only):
Two Holes: 11" x 17", LGL, LTRR, LTR, EXEC, A3, B4, A4R, A4, B5R, B5, 8K, 16KR, and 16K
Four Holes: 11" x 17", LTR, EXEC, A3, A4, 8K, and 16K
When the Inner 2/3 Hole Puncher-C is attached:
Two Holes: 11" x 17", LGL, LTRR, LTR, EXEC, A3, B4, A4R, A4, B5R, B5, 8K, 16KR, and 16K
Three Holes: 11" x 17", LTR, EXEC, A3, B4, A4, B5, 8K, and 16K
Paper Weight
14 lb bond to 80 lb cover (52 g/m2 to 220 g/m2)
Punch Hole
When the Inner 2/F4 Hole Puncher-C is attached (for the 230 V machine only):
Two or Four Holes
When the Inner 2/3 Hole Puncher-C is attached:
Two or Three Holes
Dimensions (W x D x H)/Weight
19 1/8" x 21 1/8" x 8 1/8" (485 mm x 535 mm x 205 mm)/Approximately 16.1 lb (7.3 kg)
Installation Space Including the Main Unit
(W x D)
When the Single Pass DADF-A is attached*3:
41 5/8"*4 x 29 1/8" (1,057 mm*4 x 740 mm) (when the auxiliary tray is extended)
When the DADF-AV is attached:
41 5/8"*4 x 29 1/2" (1,057 mm*4 x 750 mm) (when the auxiliary tray is extended)
*1 For 20 lb bond (81.4 g/m2) paper only. Capacity varies in other cases.
*2 When the standard staple cartridge is attached. (The maximum stapling capacity may vary, depending on the paper type and weight.)
*3 The Single Pass DADF-A is standard-equipped for the imageRUNNER ADVANCE 4551i III / 4545i III.
*4 When the inner puncher is attached, the width is 44 7/8" (1,138 mm).
69LC-0W8