<Maintenance>

This section describes how to use the auto cleaning function for the main unit and feeder.

<Clean Feeder>

(Settings/Registration)

If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder

<Clean Pressure Roller for Fixing>

(Settings/Registration)

If printed paper appears dirty, execute <Clean Pressure Roller for Fixing>.


You can use the following paper sizes/types. Size: A4, LTR Type: Thin, Plain, Color, Recycled

<Original Scanning Area Cleaning Method>

(Settings/Registration)

Start the video that shows how to clean the platen glass.

<Replace Toner Cartridge>

(Settings/Registration)

Plays the sample video explaining the method for replacing toner cartridges. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Replace Waste Toner Container>

(Settings/Registration)

Plays the sample video explaining the method for replacing the waste toner container. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Load Staples (Staples)>

(Settings/Registration)

Plays the sample video explaining the method for loading staples. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Replace Fixing Assembly>

(Settings/Registration)

Plays the sample video indicating the replacement method for the fixing assembly. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Replace ITB Unit>

(Settings/Registration)

Plays the sample video indicating the replacement method for the ITB unit. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Replace Secondary Transfer Outer Roller>

(Settings/Registration)

Plays the sample video indicating the replacement method for the secondary transfer outer roller. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Replace ADF Maintenance Kit>

(Settings/Registration)

Plays the sample video indicating the replacement method for the ADF Maintenance Kit. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Paper Drawer 1: Replace Roller Kit>

(Settings/Registration)

Plays the sample video indicating the replacement method for the roller kit for paper drawer 1. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Paper Drawer 2: Replace Roller Kit>

(Settings/Registration)

Plays the sample video indicating the replacement method for the roller kit for paper drawer 2. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Remove Jammed Paper (Example)>

(Settings/Registration)

Plays the sample video explaining the method for removing jammed paper. You can play this sample video even when paper is not jammed, so that you may understand the process in advance.

<ITB Unit>

(Settings/Registration)

After replacing the ITB unit, execute <ITB Unit> to perform initialization.

<Secondary Transfer Outer Roller>

(Settings/Registration)

After replacing the secondary transfer outer roller, execute <Secondary Transfer Outer Roller> to perform initialization.

<Paper Drawer 1: Roller Kit> to <Paper Drawer 4: Roller Kit>

(Settings/Registration)

After replacing the paper drawer roller and the roller within the paper drawer, execute <Paper Drawer 1: Roller Kit> to <Paper Drawer 4: Roller Kit> to perform initialization.

<ADF Maintenance Kit>

(Settings/Registration)

After replacing the ADF pickup roller and ADF separation pad, execute <ADF Maintenance Kit> to perform initialization.

<Control Recognized Condensation>

(Settings/Registration)

Set whether to start the process to remove condensation when condensation is detected inside the machine. If you set this mode to <On>, the process to remove condensation is automatically performed.

If you select <On> and press <OK>, a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press <Yes>.


During the process to remove condensation, printing may not be performed correctly resulting in the paper being blank. To maintain the effect of the process to remove condensation going when this mode is set to <On>, it is necessary to keep the machine's power ON.


Print jobs that are carried out during the process to remove condensation are restricted by the <Jobs to Restrict When Condensation is Recognized> settings. <Only Received Jobs>: Regardless of the <Use Fax Memory Lock>/<Use I-Fax Memory Lock> settings, the received fax/I-fax data is stored in Memory RX Inbox and cannot be printed during the process to remove condensation. Reports that are automatically output at the specified time cannot be printed. <All Jobs>: All print data cannot be printed during the process to remove condensation.

Print jobs that are carried out during the process to remove condensation are restricted by the <Jobs to Restrict When Condensation is Recognized> settings.

<Only Received Jobs>: Regardless of the <Use Fax Memory Lock>/<Use I-Fax Memory Lock> settings, the received fax/I-fax data is stored in Memory RX Inbox and cannot be printed during the process to remove condensation. Reports that are automatically output at the specified time cannot be printed.

<All Jobs>: All print data cannot be printed during the process to remove condensation.