Copying Different Size Originals Together (Different Size Originals)

You can place different size originals in the feeder and scan them at one time. You can eliminate the need to select paper and place the original again.
You are limited to certain combinations of original sizes for scanning. Scanning with an improper combination may cause damage to the originals or paper jams. Feeder
Do not place the originals together that are of different weights or paper types, as this may cause damage to the originals or paper jams.
You cannot combine all of the following modes at the same time.
<Different Size Originals>
<Select Paper>:<Auto>
Place the originals in the feeder. Placing Originals
Press <Copy>. <Home> Screen
Press <Options> on the Copy Basic Features screen. Copy Basic Features Screen
Press <Different Size Originals>.
Press <Close>.
Press  (Start).
Copying starts.
If <Different Size Originals> is set for copying, each original is output with the optimal size of paper. If you want to copy all originals with the same size of paper or copy 1-sided originals of different sizes to both sides, specify the paper with <Select Paper>. If you do not specify <Select Paper>, the output paper cannot be stapled properly.