Discarding Punch Waste (Staple Finisher-X/Booklet Finisher-X)
Follow the procedure described in this section to discard punch waste from the Puncher Unit-BG/Puncher Unit-BH that is installed in the optional Staple Finisher-X/Booklet Finisher-X.
1
Open the front cover of the finisher.
2
Pull out the punch waste tray.
Hold the handle, and gently pull out the tray towards yourself.
After pulling out the punch waste tray half way, place your hand underneath it and pull it out all the way.
3
Empty the punch waste.
4
Return the punch waste tray to its original position.
Push the punch waste tray in as far as it will go.
5
Close the front cover of the finisher.