Scanning with AirPrint

You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with OS X 10.9 or later installed. To scan using TLS, you need a Mac with OS X 10.11 or later installed.
Network Environment
One of the following environments is required.
An environment where an Apple device and the machine are connected to the same LAN
An environment where a Mac is connected to the machine via USB
For scanning, it is required to set <Use Network Link Scan> to <On>. <TCP/IP Settings>  <Use Network Link Scan>
A firmware update may also be required. Updating the Firmware
You cannot scan while settings for operations are being made, or while the machine is performing any operation whatsoever.

Scanning from a Mac

Make sure that the machine is turned ON and connected to the Mac.
For how to make sure of this, see Setting up the Network Environment.
From your Mac, add the machine in [System Preferences] [Printers & Scanners].
If the machine has already been added for printing or sending faxes, this operation is not required.
Select this machine from the list of printers in [Printers & Scanners].
Click [Scan].
Click [Open Scanner].
The [Scanner] screen is displayed.
Configure the scan settings as necessary.
Click [Scan].
The document is scanned, and the image is displayed.