Adjusting the Fixing Level for Envelopes

When printing on envelopes, if their flaps are glued (which should not) or toner fixation is poor, follow the procedure below.
1
Press   <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>  <Adjust Fixing Level for Envelopes>.
2
Select the fixing level for envelopes.
If the envelope flap is glued, set the fixing level to <Low>.
If toner is not fixed to envelopes well enough, set the fixing level to <High>.
3
Press <OK>.
This setting is only valid when printing on envelopes.
40K3-0JK