<Maintenance>

This section describes how to use the auto cleaning function for the main unit and feeder.
<Clean Feeder>
  <Adjustment/Maintenance>  <Maintenance>
If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder
<Clean Pressure Roller for Fixing>
  <Adjustment/Maintenance>  <Maintenance>
If printed paper appears dirty, execute <Clean Pressure Roller for Fixing>.
<Original Scanning Area Cleaning Method>
  <Adjustment/Maintenance>  <Maintenance>
Start the video that shows how to clean the platen glass.
<Replace Toner Cartridge>
  <Adjustment/Maintenance>  <Maintenance>  <Check Maintenance Method>
Plays the sample video explaining the method for replacing toner cartridges. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.
<Load Staples (Staples)>
  <Adjustment/Maintenance>  <Maintenance>  <Check Maintenance Method>
Plays the sample video explaining the method for loading staples. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.
<Remove Jammed Paper (Example)>
  <Adjustment/Maintenance>  <Maintenance>  <Check Maintenance Method>
Plays the sample video explaining the method for removing jammed paper. You can play this sample video even when paper is not jammed, so that you may understand the process in advance.
<Control Recognized Condensation>
  <Adjustment/Maintenance>  <Maintenance>
Set whether to start the process to remove condensation when condensation is detected inside the machine. If you set this mode to <On>, the process to remove condensation is automatically performed.
If you select <On> and press <OK>, a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press <Yes>.
40K3-0H8