Turning OFF the Machine

This section describes how to turn OFF the machine.


Check the machine's operation status before turning it OFF Do not turn OFF the machine while using the Fax/I-fax function. I-fax or fax documents cannot be sent or received when the machine is turned OFF. Do not turn OFF the machine if the <Backing up stored data from Remote UI...> message is displayed on the touch panel display. Doing so may cause the machine to fail to back up the stored data. If the machine is turned OFF during scanning or printing, a paper jam may occur.

Check the machine's operation status before turning it OFF

Do not turn OFF the machine while using the Fax/I-fax function. I-fax or fax documents cannot be sent or received when the machine is turned OFF.

Do not turn OFF the machine if the <Backing up stored data from Remote UI...> message is displayed on the touch panel display. Doing so may cause the machine to fail to back up the stored data.

If the machine is turned OFF during scanning or printing, a paper jam may occur.


You can shut down the machine from the Remote UI. Turning OFF/Restarting the Machine

Open the power switch cover and press the power switch toward "

Close the power switch cover.


The machine may take some time to completely shut down. Do not remove the power plug until the display and lamps turn OFF. To restart the machine, wait for at least 10 seconds after the system is turned off, and then turn the machine back ON. When <Quick Startup Settings for Main Power> is enabled, wait for at least 20 seconds to restart the machine. <Quick Startup Settings for Main Power>

Turning ON the Machine