If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>.
5
Read the message that is displayed, and select <OK>.
6
Select <WPS PIN Code Mode>.
7
Select <Yes>.
The PIN code is generated and shown on the display.
From a Computer
8
Register the generated PIN code to the wireless router.
Register the PIN code on the setup screen displayed in step 1.
The PIN code must be registered within 10 minutes after selecting <Yes> in step 7.
If an error message is displayed during setup
Select <Close> and return to step 6.
From the Operation Panel
9
Wait until the message <Connected.> is displayed.
10
Select <Close>.
Wait several minutes until the IP address and other items are set automatically.
Signal strength
When more than one wireless router is available for connection, the machine connects to the device with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
While the machine is connected to the wireless LAN, the Wi-Fi icon is displayed in the Home screen or the Basic Features screen of each function. Basic Screens
Reducing power consumption
You can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router. <Power Save Mode>
If the IP address of the machine has changed
In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the connection is maintained as long as the machine and the computer belong to the same subnet.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
Portal Top
<Network>.
