Emptying the Punch Waste (Staple Finisher-W PRO/Booklet Finisher-W PRO)
Follow the procedure described in this section to discard punch waste from the Puncher Unit-BS/Puncher Unit-BT/Puncher Unit-BU that is installed in the optional Staple Finisher-W PRO/Booklet Finisher-W PRO.
1
Open the front cover of the finisher.
2
Pull out the punch waste tray.
Make sure that the guide (F-A2) is closed before pulling out the punch waste tray so that it does not block the punch waste tray. Paper Jams in the Staple Finisher-W PRO/Booklet Finisher-W PRO
| Hold the punch waste tray handle and gently pull it toward you.  |
 | Pull it out completely, supporting it with your hand. |
3
Discard the punch waste.
4
Return the punch waste tray to its original position.
Make sure to insert the punch waste tray as far as it will go.
5
Close the front cover of the finisher.