Duplex Color Image Reader Unit-M (Optional)

This section describes how to clear a paper jam which occurs in the Duplex Color Image Reader Unit-M. The location of the Duplex Color Image Reader Unit-M is indicated in the following illustration.
NOTE
The Duplex Color Image Reader Unit-M is an optional product.
Follow the procedure described below, while referring to the location of the paper jam and the directions that appear on the touch panel display, to remove the jammed paper.

1.
Remove originals from the original supply tray.
2.
Pull the lever to open the feeder cover.
3.
If an original is jammed in the feeder cover, gently pull it out in the direction of the arrow.
4.
Lift the release lever, and check whether an original is jammed while rotating the dial.
1.Lift the release lever.
2.If the original is jammed, turn the dial counterclockwise, and gently pull it out in the direction of the arrow.
If the original is jammed, it moves to the original output tray.
3.Lower the release lever.
5.
Close the feeder cover.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
6.
Lift up the feeder, and check if there is a jammed original.
1. Lift the feeder.
2. If an original is jammed, gently pull it out in the direction of the arrow.
3. Close the feeder.
CAUTION
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
Be aware that the light emitted from the platen glass may be very bright when closing the feeder.
NOTE
If there is difficulty in removing jammed paper, close the feeder and open the feeder cover, and then proceed to step 6.
7.
Follow the instructions on the screen.
NOTE
The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper jam is cleared.
52W7-0U1