Before Starting SMS (Preparations)

Before an administrator logs in to SMS, start the machine and specify the following settings:

Specify the Network Settings

Specify the settings under [Network] in [Preferences] (Settings/Registration) and find out the machine's IP address. (See "Network.")

Specify the TLS Encrypted Communication Settings

SMS always uses TLS encrypted communication. If the default key for TLS is not set in advance, you cannot log in to SMS.

Enable Access to the Machine from the Web Browser

Set [Use HTTP] to 'On' in [TCP/IP Settings] in [Network] in [Preferences] (Settings/Registration). If it is not set to 'On', you cannot access the machine from the Web browser. For more information, see "Settings Common to TCP/IPv4 and TCP/IPv6."
IMPORTANT
By setting [Use HTTP] to 'On', you can open a necessary port. However, it is recommended that it is set to 'Off', if a port is not used. If you leave the port open, an unauthorized user may access the machine.
52UC-20J