Login Screens

When Default Authentication is set as the login service, there are two types of login screens.

Touch Panel Display

It is necessary to set [Department ID Management] to 'On' and set all functions in [Limit Functions] to 'On' in order to perform user authentication. Enter a Department ID/PIN or the System Manager ID/System PIN to log in to the machine.

Web Browser

There are two methods for logging in from a Web browser.

If [Department ID Management] is set to 'On':

Enter a Department ID/PIN or System Manager ID/System PIN to log in to the Remote UI or a MEAP application (including login applications).

If [Department ID Management] is set to 'Off' and System Manager Settings are set:

Select [System Manager Mode] and enter the System Manager ID/System Manager PIN, and then click [Log In] to log in to the Remote UI or a MEAP application (including login applications).

General user should select [General User Mode] and enter PIN, and then click [Log In] to log in.

NOTE
If you set [Allow] for [Access by General User], you can select [General User Mode]. (See "UI remota.") If [Department ID Management] is set to 'Off' and System Manager Settings are not set on the machine, a login screen is not displayed, and user authentication is not performed. General users may not be able to log in to some MEAP applications.