Adjusting the wrinkle correction level in the plus direction may result in a longer wait time before output begins. If the gloss unevenness occurs when printing on LTR or A4 transparencies, set <Adjust Temp. to Prevent Wrinkles> to -1 to -4. The gloss unevenness may be corrected if you use LTRR or A4R paper. If the unevenness occurs when printing on a coated paper, set <Adjust Temp. to Prevent Wrinkles> to -4. |
Adjustment in <-> Direction is Recommended for Following Cases | Adjustment in <+> Direction is Recommended for Following Cases | |
Envelopes | Traces of overlapping envelope flaps may stand out. Printing problems may occur. Envelope paper thickness may be uneven. | Wrinkles may appear. Envelope flaps with glue may become stuck |
Other | When performing 1-sided printing, a semi-circular smudge of decreasing density may appear on the back edge of the paper. | Wrinkles may appear. When performing 1-sided printing, a smudge of decreasing density may appear on the back edge of the paper. When performing 2-sided printing, a smudge of decreasing density front and back sides. |