Settings/Registration Table

The following settings can be selected or stored on the Settings/Registration screen:
Some of the settings may not be displayed depending on the configuration of optional equipment installed on the machine.
Some changes may not be reflected immediately, depending on the settings. In this case, it is necessary to perform one of the following.
Press <Yes> on the screen confirming whether you want to make changes.
Press  (Settings/Registration)  <Apply Setting Changes>.
Restart the machine.
The settings that can be specified differ between administrators and general users, and vary depending on restrictions imposed by the administrator.

Description of the Settings

Describes the functions of each setting item on Settings/Registration. The settings that can be operated vary depending on the user authority and the machine you use. Setting items and values are written under Setting Description. The factory defaults are written in bold red characters.

"DeviceAdmin" and "NetworkAdmin"

The "DeviceAdmin" and "NetworkAdmin" items are written for each item in the Settings/Registration table. If the administrator role is specified for the machine, users with Administrator privileges can change all of the settings, while general users are restricted and can change only some of the settings. Meanwhile, users with DeviceAdmin or NetworkAdmin privileges can change certain settings even while those settings are restricted. For those settings, "Yes" or "No" indicates whether the settings can be changed with DeviceAdmin and NetworkAdmin privileges.

"Can be set in Remote UI" and "Device Information Delivery Available"

The "Can be set in Remote UI" and "Device Information Delivery Available" items are written for each item in the Settings/Registration table. "Yes" or "No" indicates if the settings can/cannot be set in the Remote UI or are/are not available for Device Information Distribution.

Import All Function

The "Import All Function" item is written in the Settings/Registration table. Depending on whether a setting item can be batch imported, "A", "B", "C", or "No" is written. "A", "B", and "C" refer to the following cases.

Case A

Importing all to your machine
Restoring the settings information to your machine for backups.
Settings Information

Case B

Importing all to the same model machine
Applies to machines of the same series as this machine.
Settings Information

Case C

Importing all to the different model machine
Applies to models that support batch importing.
Settings Information

Name of Item When Exporting with the Remote UI

This section indicates which Settings/Registration items correspond with which items of the batch export function of the Remote UI. "-" is indicated for items that are not imported/exported. Importing/Exporting All Settings
The items that can be selected for the batch export function of the Remote UI are indicated below.
Items That Can Be Selected with the Batch Export Function
Settings/Registration Basic Information
Paper Type Management Settings
Settings for Printer Settings
Download Profile for Printer Settings
Forwarding Settings
Box Settings
Department ID Management Settings
Key Settings
Certificate/Certificate Revocation List (CRL) Settings
Visual Message Settings
Home Settings
Web Access Settings
Favorite Settings
Address Book
User Group Address List
Authentication User Management
Security Policy Settings
Personal Setting Information*
MEAP Application Setting Information
* For information on the settings that are included in [Personal Setting Information], see List of Items That Can Be Personalized. Select an item in "Name of Item When Exporting with the Remote UI" listed on the Settings/Registration table when exporting the value (which you set from <Device Settings>) from the Remote UI. <Personal Settings> and <Device Settings>