Staple Finisher-W PRO

Paper Size/Weight/Type
Paper Sizes
Paper available for the Main Unit (Supported Paper Sizes)*1*2*3
Paper Weight
52 g/m2 to 350 g/m2
Paper Type
Paper available for the Main Unit (Supported Paper Types)
*1 You can use custom size settings ranging from 100 mm × 148 mm to 330.2 mm × 487.7 mm.
*2 The paper whose width is less than 182.0 mm cannot be output from the Tray B.
*3 The available size range for long paper is from 210.0 mm x 487.8 mm to 330.2 mm x 1,300 mm. With the Long Sheet Tray-B attached, using paper with the length of 762 mm or more requires you to support the paper with your hands.
Capacity Per Tray
(Tray A)
No Collating/Collate/Group/Offset mode
64 g/m² / 75 g/m² / 80 g/m²
1,000 sheets (or 147 mm in height)
Envelopes
Kakugata 2: 300 sheets (or 130 mm in height)
Other than Kakugata 2: 150 sheets (or 130 mm in height)
Long Paper (when the Long Sheet Tray-B is attached)
64 g/m² to 79 g/m²: 100 sheets
80 g/m² to 150 g/m²: 50 sheets
151 g/m² to 300 g/m²: 25 sheets
Long Paper (when the Finisher Long Sheet Catch Tray-A is attached)
487.8 mm to 762.0 mm
52 g/m² to 150 g/m²: 300 sheets
151 g/m² to 300 g/m²: 150 sheets
762.1 mm to 1,300 mm: 10 sheets
Z-Fold mode (when the Paper Folding Unit-J is attached)
30 sheets
Half Fold mode (when the Paper Folding Unit-J is attached)
50 sheets
Capacity Per Tray
(Tray B)
No Collating/Collate/Group/Offset mode
If the High Volume Stack Mode is set to 'Off':
A4, B5, LTR, and EXEC: 2,000 sheets (or 285 mm in height)
All other combinations: 1,000 sheets (or 147 mm in height)
If the High Volume Stack Mode is set to 'On':
(The maximum stack volume may vary, depending on the paper type.)
A4, B5, LTR, and EXEC: 4,000 sheets (or 490 mm in height)
A4R, B5R, and LTRR: 2,000 sheets (or 285 mm in height)
A3, B4, 11" × 17", and LGL: 1,500 sheets (or 216 mm in height)
330 mm x 483 mm, 320 mm x 450 mm (SRA3), and 305 mm x 457 mm: 1,000 sheets (or 147 mm in height)
Staple mode
A4, B5, LTR, EXEC, and 16K: 200 sets, 490 mm in height, or 3,000 sheets
A4R, B5R, LTRR, and 16KR: 200 sets or 285 mm in height (2,000 sheets)
A3, B4, 11" × 17", LGL, and 8K: 200 sets or 216 mm in height (1,500 sheets)*
Z-Fold mode (when the Paper Folding Unit-J is attached)
30 sheets
* Coated paper: 1,000 sheets (or 147 mm in height)
Max. Stapling Capacity/Available Staple Size*
Corner Stapling and Double Stapling
A4, B5, LTR, EXEC, and 16K: 100 sheets (52 g/m2 to 80 g/m2) or below 11 mm in height (including 2 cover sheets up to 300 g/m2)
A3, B4, A4R, B5R, 11" × 17", LGL, LTRR, 16KR, and 8K: 50 sheets (52 g/m2 to 81.4 g/m2) or below 5.5 mm in height (including 2 cover sheets up to 300 g/m2)
* When the standard staple cartridge is attached. (The maximum stapling capacity may vary, depending on the paper type and weight.)

Punch
When the puncher unit is attached
Paper Sizes:
2/3 Holes:
2 Holes: 11" x 17", LGL, LTRR, LTR, EXEC, and Custom Size (182.0 mm x 182.0 mm to 297.0 mm x 432.0 mm)
3 Holes: 11" x 17", LTR, EXEC, and Custom Size (240.0 mm x 182.0 mm to 297.0 mm x 432.0 mm)
2/4 Holes:
2 Holes: A3, B4, A4R, A4, B5R, B5, A5, and Custom Size (182.0 mm x 182.0 mm to 297.0 mm x 432.0 mm*)
4 Holes: A3, B4, A4, B5, A5, and Custom Size (257.0 mm x 182.0 mm to 297.0 mm x 432.0 mm)
4 Holes: A3, B4, A4, B5, A5, 11" x 17", LTR, EXEC, 8K, 16K, and Custom Size (257.0 mm x 182.0 mm to 297.0 mm x 432.0 mm）
Paper Weight: 52 g/m2 to 300 g/m2
Punch Holes: 2/3 Holes, 2/4 Holes, or 4 Holes
* Paper with a width from 182.0 mm to 203.0 mm is only available with a length from 257.0 mm to 270.0 mm.
Power Source/Maximum Power Consumption
220 V - 240 V AC, 50/60 Hz, 8 A/500 W or less
Dimensions
(W x D x H)
800 mm (890 mm*, 1,136 mm**, 1,490 mm***) x 792 mm x 1,239 mm
* When the auxiliary tray is extended
** When the Long Sheet Tray-B is attached
*** When the Finisher Long Sheet Catch Tray-A is attached
Weight
Approximately 130 kg
Installation Space Including the Main Unit
(W x D)
5,013 mm x 941 mm (when the POD Deck Lite-C, Booklet Trimmer-F, Paper Folding Unit-J, Multi Function Professional Puncher-B, and Document Insertion Unit-N are attached)
85EJ-0X6