Replenishing the Staples for the Inner Finisher
1
Open the front cover of the finisher.
2
Replenishing the Staples for the Inner Finisher.
Pull the green handle to disengage the lock, and lift the case slightly upwards while pulling it straight out.
3
Remove the empty staple case from the staple cartridge.
Hold the staple case around the position of the arrow mark, and remove it in the direction of the arrow.
4
Take out a new staple case from its box.
5
Load the new staple case in the staple cartridge.
Insert the plate protruding from the staple case front end into the staple cartridge, and lower the staple case to place it in the staple cartridge.
6
Hold the green knob on the staple cartridge and push in the cartridge as far as it will go.
7
Close the front cover of the finisher.
Dry stapling may be performed automatically for staple repositioning.