Setting Up Using the Setup Guide

When the machine is turned on (Turning ON the Machine) for the first time, the Setup Guide starts up to assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the setting screens are displayed in the following order.
Step 1
Set the language to be displayed on the operation panel screen or in reports, as well as the country or region where the machine will be used.
1
Select a language.
2
Select <Yes>.
3
Select a country or region.
Step 2
Adjust the machine's date/time.
1
Select a time zone.
What is UTC?
Coordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks and time. The correct UTC time zone setting is required for Internet communications.
2
Enter the date and time, and select <Apply>.
Tap the entry field, and enter the date and time.
Step 3
Set the System Manager ID that is the system manager account, and the Remote UI Access PIN. If the PIN is not set, you cannot use the Remote UI.
1
Select <Yes>.
If you select <No>, the necessary setting to use the Remote UI is not performed, and the Setup Guide proceeds to step 4.
2
Select <Yes>.
If you select <No>, the default values of the System Manager ID and PIN are not changed, and the Setup Guide proceeds to step 4 under step 3.
3
Specify the System Manager ID and PIN.
Specify <System Manager ID>  <System Manager PIN>.
Enter each value, and then select <Apply>.
After the confirmation screen appears, re-enter the PIN.
Do not forget your PIN.
You cannot register a PIN that consists only of zeros, such as "00" or "0000000."
4
Select <Yes>.
If you select <No>, the Remote UI Access PIN is not set, and the Setup Guide proceeds to step 4.
5
Set the Remote UI Access PIN.
Enter the PIN, and then select <Apply>.
After the confirmation screen appears, re-enter the PIN.
Do not forget your PIN.
You cannot register a PIN that consists only of zeros, such as "00" or "0000000."
Step 4
To achieve good copy quality, adjust the gradation.
1
Select <Yes>.
If you select <No>, color adjustment is not performed, and the Setup Guide proceeds to step 5.
2
Check that the size and type of paper displayed on the screen is loaded in the machine, and select <OK>.
3
Confirm the procedure, and select <Start>.
An adjustment image is printed.
4
Open the feeder or the platen cover after the screen displayed during printing is closed.
5
Place the printed adjustment image on the platen glass.
Place the adjustment image with the print side facing down while checking that the black stripe is placed on the back side of the machine.
6
Gently close the feeder or the platen cover.
7
Select <Start Scanning>.
The adjustment image is scanned, and the next adjustment image is printed.
8
After scanning and printing are finished, open the feeder or the platen cover and remove the adjustment image.
9
Repeat steps 5 to 8.
To complete the adjustment, print the adjustment image three times, and scan it each time it is printed.
Step 5
Configure the settings to connect to the network using the wireless LAN.
1
Select <Yes>.
If you select <No>, wireless LAN is not set, and the Setup Guide is complete, the Home screen appears.
2
Select <OK>.
3
Select the setting method.
For more information about the wireless LAN settings, see Connecting to a Wireless LAN.
Step 6
The one-touch button referred to as "Application Library" is provided in the Home screen. You can read the description of each function.
1
To finish the Setup Guide, select <End>.
 
When the Setup Guide is complete, the Home screen appears.
6C6U-003