Entering Sleep Mode

The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the operation panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can save power simply by pressing

on the operation panel.


When in sleep mode When the machine enters sleep mode, lights up yellow green. Situations in which the machine does not enter sleep mode When the machine is in operation When the Data indicator is lit up or blinking When the machine is performing an operation such as adjustment or cleaning When a paper jam occurs When the receiver of the external telephone is off the hook When the machine is set such that the fax incoming ring will not sound When the menu screen is displayed When a job is waiting to be scanned to a USB memory device or to a computer When an error message is displayed on the screen (There are some exceptions. The machine sometimes enters sleep mode when error messages are displayed.) When the machine is communicating with an LDAP server, etc. When the SSID/network key screen for Direct Connection is displayed When settings are being imported or exported

When in sleep mode

When the machine enters sleep mode,

lights up yellow green.

Situations in which the machine does not enter sleep mode

When the machine is in operation

When the Data indicator is lit up or blinking

When the machine is performing an operation such as adjustment or cleaning

When a paper jam occurs

When the receiver of the external telephone is off the hook

When the machine is set such that the fax incoming ring will not sound

When the menu screen is displayed

When a job is waiting to be scanned to a USB memory device or to a computer

When an error message is displayed on the screen (There are some exceptions. The machine sometimes enters sleep mode when error messages are displayed.)

When the machine is communicating with an LDAP server, etc.

When the SSID/network key screen for Direct Connection is displayed

When settings are being imported or exported

Changing the Auto Sleep Time value

Auto Sleep Time is a function that automatically puts the machine into the sleep mode if it remains idle for a specified length of time. We recommend using the factory default settings (<Timer/Energy Settings>) to reduce power usage. If you want to change the amount of time that elapses before the machine enters the auto sleep mode, perform the procedure below.

<Menu>

Set the amount of time that elapses before the machine automatically enters sleep mode

<Apply>

Changing the Sleep Mode Setting to the Specified Time

You can configure a setting so that the machine is placed into the sleep mode at the specified time. You can also configure a setting so that the sleep mode is released at the specified time.

<Menu>

Select <On> in <Set This Function>, and enter the time

<Apply>

Exiting Sleep Mode

You can press

or any other key on the operation panel to exit the sleep mode.


You can also tap the display to exit sleep mode. If an external telephone is connected, the machine exits sleep mode when you take the receiver off the hook.