Checking Scanned Images Before Sending (Preview)
| | You can check scanned images on the preview screen before sending. You can also delete, move, or switch pages on the preview screen. |
|
The original cannot be checked before sending with the Direct Sending or Manual Sending mode, even if <Preview> is set. |
1
Place the original.
Placing Originals2
Press <Fax>.
<Home> Screen3
Specify the destination on the Fax Basic Features screen.
Fax Basic Features Screen4
Specify the scan settings as necessary.
Basic Operations for Sending Faxes5
Press <Options>
![](./images/book_images/b_in_arrow_right.gif)
<Preview>
![](./images/book_images/b_in_arrow_right.gif)
<Close>.
6
Press
![](./images/book_images/b_key_Start.gif)
(Start).
Originals are scanned and the preview screen appears.
To cancel scanning, press <Cancel> or
![](./images/book_images/b_key_Stop.gif)
(Stop)
![](./images/book_images/b_in_arrow_right.gif)
<Yes>.
When <Press the [Start] key to scan the next original.> is displayed![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Place the next original to scan and press
![](./images/book_images/b_key_Start.gif)
(Start). When scanning all of the originals is complete, press <Preview and Send> to display the preview screen.
7
Check the scanned images on the preview screen.
Edit the scanned image on the preview screen as necessary.
To delete a page![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
You can delete the page currently displayed on the preview screen.
To move a page![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
You can move a page to the specified destination.
1 | Press <Edit Scanned Data>. |
2 | Press <Move Page Position>. |
3 | Enter the page numbers corresponding to <Move Page> and <Behind Page>. |
4 | Press <OK>. |
To switch the locations of pages![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
You can switch the locations of specified pages.
1 | Press <Edit Scanned Data>. |
2 | Press <Switch Page Position>. |
3 | Enter the page numbers corresponding to <Target Page A> and <Target Page B>. |
4 | Press <OK>. |
8
Press <Start Sending>.
Sending starts.