Follow the procedures below to convert scanned documents into a file format commonly supported by a computer to save in memory media. This method is convenient when you need to move files to a computer not connected to a network.
You cannot store documents in the memory media if there is no free space available.
If <Select Option When Connecting Memory Media> is set to <On>, a shortcut to <Scan and Store in Memory Media> is displayed when you insert memory media. Press <Scan and Store in Memory Media> and proceed to step 4. <Select Option When Connecting Memory Media>Inserting a memory media
To cancel scanning, press <Cancel> or (Stop) <Yes>.
When <Press the [Start] key to scan the next original.> is displayed
Place the next original to scan and press (Start). After scanning all of the originals, press <Start Storing> to save the file.
To check the result of saving, press (Status Monitor) <Store> <Job Log>. If <NG> is displayed, the file is not saved successfully. Try the operation again.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.