Saddle Stitch Fold Placement Adjustment
If you are using the Saddle Stitch mode of the Saddle Finisher-AN, and you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch fold placement to compensate for this error.
This mode enables you to adjust the folding position without changing the stapling position.
This mode can be set when the Saddle Finisher-AN is attached. (See "Finisher-AN/Saddle Finisher-AN/Puncher Unit-BS/Puncher Unit-BT.")
IMPORTANT |
If the Saddle Finisher-AN is attached to the machine, you can adjust both the stitch position and the fold placement. If both the saddle stitch position and the fold placement are not aligned with the center of the paper, adjust the fold placement to match the saddle stitch position with [<Adjust Saddle Stitch Fold Position>] and then adjust the saddle stitch position and the fold placement in [<Change Fold/Stitch Position>]. [<Adjust Saddle Stitch Fold Position>] adjusts only the fold placement while [<Change Fold/Stitch Position>] adjusts both the saddle stitch and fold position. For information on saddle stitch position adjustment, see "Saddle Stitch Position Adjustment." |
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Saddle Stitch Fold Position].
3.
Adjust the saddle stitch fold placement by pressing [
] or [
] → press [OK].
] or [] → press [OK].