Double Staple Width Adjustment
You can adjust the double staple width.
This mode can be set when the Finisher-AN or Saddle Finisher-AN is attached. (See "Finisher-AN/Saddle Finisher-AN/Puncher Unit-BS/Puncher Unit-BT.")
NOTE |
This item is only valid [Offset] is not set. |
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Double Staple Width].
3.
Press [-] or [+] to adjust the staple width → [OK].