Adjusting the Image Sharpness
You can adjust the sharpness to scan text and lines with a sharper contrast. You can also reduce the sharpness for the half-tone dots of printed photos, etc. to scan with a softer image.
Low
If you scan an original containing halftones, such as a printed image, the moiré effect (a shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using [Low] as the setting.
Low Set | Low Not Set | ||
 |  |  |  |
High
This setting enhances the edges of original images so that faint or fine text is reproduced with a sharper contrast. This setting is particularly suited for scanning blueprints and faint pencil drawn images.
High Set | High Not Set | ||
 | |  |  |
1.
Press 
(Main Menu) → [Scan and Send].
(Main Menu) → [Scan and Send].
2.
Specify the destination → press [Options] → [Sharpness].
3.
Adjust the sharpness → press [OK] → [Close].
IMPORTANT |
The setting for [Sharpness] is invalid when all of the conditions below are met. The color mode is Black & White The original type is set to Text The resolution is set to 100 x 100 dpi, 150 x 150 dpi, or 200 x 100 dpi To activate [Sharpness], change the settings. |