Output Tray Designation

You can designate which output tray to use for specific functions.

The output trays indicated by Tray A, B, or C vary according to the attached optional products.

This mode can be set when either of the following optional products is attached. (See "Finisher-AN/Saddle Finisher-AN/Puncher Unit-BS/Puncher Unit-BT," "High Capacity Stacker-H.")

Options Attached	Default Setting	Tray A/B/C
Finisher-AN	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Other
Saddle Finisher-AN	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Other
Finisher-AN + High Capacity Stacker-H	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 3 Receive, 3 Other Tray C: 1 Receive, 1 Other
Saddle Finisher-AN + High Capacity Stacker-H	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 3 Receive, 3 Other Tray C: 1 Receive, 1 Other

Press

(Settings/Registration).

Press [Function Settings] → [Common] → [Paper Output Settings].

Press [Output Tray Settings].

Set the output and priority settings for Tray A/B/C → press [OK].

[Other] is used for setting the priority for printing reports.

If you want to use an output tray for only one function, select only that function.

IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for I-fax documents to prevent them from getting lost.

NOTE
You can designate an output tray for multiple functions. The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1" and "2." If High Volume Stack Mode is set to "On", the output order for Tray B is set to "1", so that a priority to Tray B cannot be changed. However, if the output order for Tray C is set to "1" when the High Capacity Stacker-H is attached, the priority is given to Tray C. (See "High Volume Stack Mode.")

NOTE

You can designate an output tray for multiple functions.

The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1" and "2."

If High Volume Stack Mode is set to "On", the output order for Tray B is set to "1", so that a priority to Tray B cannot be changed. However, if the output order for Tray C is set to "1" when the High Capacity Stacker-H is attached, the priority is given to Tray C. (See "High Volume Stack Mode.")