Replacing the Toner Cartridge
0UUY-0H9 0UW1-0H9 0YRY-0H4 0X7F-0K9 0X7H-0K9 1100-0H7 0X6E-0K9 0X6W-0K9 10XJ-0H7 0X7C-0K9 0X7A-0K9 1106-0H7 0WXY-0KA 0X7E-0K9 10YY-0H7 10H3-0H5 0WR6-0KH 0WR7-0KH 108A-0H6 1116-0H6 10H4-0H5 0WR5-0KH 0WR8-0KH 0YWJ-0J3 0YWH-0K9 0YWR-0HX 0YWK-0K9 0YWE-0K9 0YWF-0K9 0YAS-0H7
When toner starts running low or has run out, a message is displayed prompting you to prepare a new toner cartridge or perform toner cartridge replacement. Prepare a new toner cartridge or perform toner cartridge replacement according to the displayed message.
IMPORTANT |
Do not replace toner cartridges until the message prompting you to do so appears. |
NOTE |
For details about each message, see Countermeasures for Each Message. For information on the product numbers for toner cartridges, see Consumables. You can check the current amount of toner remaining. Checking the Remaining Toner Level |
How to Replace the Toner Cartridge
1
Open the toner replacement cover.
Open it by holding the left and the right sides of the cover.
2
Turn the locking lever in the direction of the arrow until it stops, to unlock the toner cartridge.
IMPORTANT:
Make sure to turn the locking lever to the right until it stops. (Otherwise, you may not be able to remove the toner cartridge.)
3
Remove the toner cartridge.
 | Hold the blue section of the toner cartridge with your left hand and lift the lower section with your right hand.  |
 | Pull it out horizontally toward you. |
IMPORTANT:
Never touch the tip of the toner cartridge or subject it to shock by hitting it. Doing so may cause the toner cartridge to leak.
4
Take out a new toner cartridge from the box.
5
Stand the new toner cartridge in an upright position and turn the protective cap in the direction of the arrow to remove it.
6
Insert the new toner cartridge.
| Hold the blue section of the toner cartridge with your left hand and uphold the lower section with your right hand.  |
| Insert it horizontally as far as it will go. |
7
Turn the locking lever completely to the left to lock the toner cartridge, and close the toner replacement cover.
| Turn the locking lever completely to the left.  |
| Close the toner replacement cover. |
IMPORTANT:
Make sure to turn the locking lever to the left until it stops. (Otherwise, the toner cartridge cannot be locked.)
If you have not turned the locking lever completely to the left, you cannot close the toner replacement cover. Do not forcefully close it.
NOTE |
Printing that was suspended because the toner had run out will automatically resume once the toner cartridge is replaced. If brightness and density differ after the toner cartridge is replaced, perform the following adjustment. |