Replacing the Staple Case in the Saddle Stitcher Unit (Booklet Finisher-AC)

Follow the procedure described in this section to replace the staple case in the saddle stitcher unit for the optional Booklet Finisher-AC.
1
Open the front cover of the finisher.
2
Pull out the saddle stitcher unit.
3
Pull the lever on the two staple cartridges toward you to remove them.
4
Remove the empty staple case.
Hold both sides at the top of the empty staple case.
Lift and pull out the empty staple case.
5
Take out a new staple case from the box.
6
Insert the new staple case in the staple cartridge.
7
Insert the two staple cartridges into the saddle stitcher unit.
Make sure that the staple cartridges are firmly inserted.
8
Push the saddle stitcher unit back into the machine, and close the front cover of the finisher.
If stapling dose not work after staples are replenished, perform staple repositioning manually. <Saddle Stitch Staple Repositioning>
85FA-01L