Saving Documents in Memory Media
Follow the procedures below to convert scanned documents into a file format commonly supported by a computer to save in memory media. This method is convenient when you need to move files to a computer not connected to a network.
|
You cannot store documents in the memory media if there is no free space available. |
1
Set the original.
Placing Documents2
Press <Scan and Store>.
<Home> Screen3
Press <Memory Media>.
4
Select the desired memory media.
5
Display the save location and press <Scan>.
6
Specify the scan settings as necessary.
7
Press

(Start).
Originals are scanned and saved as files.
To cancel scanning, press <Cancel> or

(Stop)

<Yes>.
When <Press the [Start] key to scan the next original.> is displayed
Place the next original to scan and press

(Start). After scanning all of the originals, press <Start Storing> to save the file.
To check the result of saving, press

(Status Monitor)

<Store>

<Job Log>. If <NG> is displayed, the file is not saved successfully. Try the operation again.